Major Clearance Rack Refresh
Stampin' Up! did a major Clearance Rack refresh. I was surprised to see so much product added to the Rack. Wowzers!!! Some great deals with some at less than half the original price.
My share for today are some Darling Snowman Gift Card Holders. Stampin' Up! shared how to make this Gift Card Holder that's so easy to create. I LOVE the design as it shows off their awesome Designer Series Paper. Kudoo's to the Stampin' Up! Designer for such an awesome Gift Card Holder. Let's take a look at how I designed my Gift Card Holders:
Now, how Sweet is this Lady Snowman surrounded by little Christmas Snow Birds!!! I posted my handwritten Template with directions towards the bottom of my Blog Post.
Isn't she just Adorable!!!
For all the Gift Card Holders: I trimmed out 7-1/2" x 6" Panels of Cardstock in Flirty Flamingo, Coastal Cabana, Blueberry Bushel, Shaded Spruce and Real Red.
I adhered them to my Gift Card Holders with Stampin' Dimensionals.
I adhered them to my Gift Card Holders with Stampin' Dimensionals.
I used my 1-1/2" Circle Punch to punch a Thumbhole (a half circle) in my Panels (remember to do this before you adhere the Gift Cards together), adhered my Tear & Tape Adhesive and folded up the Gift Card Holders.
Pictured above is the Gift Card Insert sliding out of the Gift Card Holder.
I used Stampin' Up!'s Let It Snow Specialty Designer Series Paper on the Gift Card Holders Front ( 3" x 4" ) and for the Gift Card Holders' insert ( 3" x 5" ).
I fussy cut out the Snow Lady and the Snow Birds from the Let It Snow SDSP.
I fussy cut out the Snow Lady and the Snow Birds from the Let It Snow SDSP.
I used Stampin' Up!'s All Around Wreath Dies to die cut out my Wreaths in the same colors as my Gift Card Holders.
Using Stampin' Up!'s Layering Circles Dies, I used the 2-3/8" Circle Die to die cut out Circles from Coastal Cabana Cardstock for behind each wreath.
I adhered the Wreath to the Circle and to my Gift Card Holder with Stampin' Dimensionals.
For this Gift Card Holder: I used my 1/8" Handheld Hole Punch, punched out Circles from Red Glimmer Paper and adhered them to my Wreath as shown in the picture above.
Using the Snowman Builder Punch, I punched out the Snowman and then fussy cut out the Mittens and the Hat from Stampin' Up!'s Let It Snow Specialty Designer Series Paper.
I assembled my Snowman and adhered him to my Wreath with Stampin' Dimensionals.
I used the following Ribbons on my Gift Card Holder Inserts: 1/4" Bermuda Bay Striped Ribbon, 3/8" Silver Metallic Edge Ribbon, 3/8" Real Red Cotton Ribbon, 1/8" Real Red Curly Ribbon and 3/8" Shaded Spruce Gold Striped Ribbon. I wrapped the Ribbon around the Inserts and then tied them into a Bow.
I used the Itty Bitty Christmas Stamp Set to stamp all of the sayings in Black Memento Ink and punched them out with the Tree, Moose and Gleaming Ornaments Punches.
I trimmed out Cardstock Panels to use for samples where the actual Gift Card gets adhered to the Insert with Glue Dots.
I adhered the punched out sayings to the Ribbons on the Inserts with Glue Dots.
I adhered Snowflake Sequins to 3 of the Wreaths.
For this Gift Card: Using the Snowman Season Stamp Set, I stamped my Snowman onto Shimmery White Cardstock in Black Memento Ink.
Using one of the Dot Stamps from a Paper Pumpkin Kit, I stamped the Snowmans' Cheeks in Flirty Flamingo Ink.
Using the Snowman Builder Punch, I punched the Arms from Soft Suede Cardstock and the Hat from Basic Black Cardstock.
I fussy cut a Red Strip of Real Red Cardstock for the Hat.
I fussy cut out the Holly and Berries from the Let It Snow SDSP.
I assembled the Snowman and adhered him to the Wreath with Stampin' Dimensionals.
I fussy cut out this Snowman from the Let It Snow SDSP.
I adhered the Snowman to the Wreath with Stampin' Dimensionals.
I used scraps of the Let It Snow SDSP to stamp my Saying onto and then punched them out.
I think this Snowman is looking sideways to see if Santa is on his way!!! =)
I really loved working with the Blueberry Bushel and Flirty Flamingo colors for Christmas. It was a nice change from the traditional colors.
It's a toss up between the Snow Lady and this Snowman as to which is my FAVE.
O.K. I'm running out of things to say!!! =)
Such cuteness!!! And ...
Here's my Sloppy hand written Template for the Gift Card Holder.
January - June 2020 Mini Catalog (Occasions Catalog)
Demonstrator Pre-Orders December 3, 2019 - January 2, 2020
Customer Orders January 3, 2019
January - June 2020 Sale-A-Bration
Demonstrator Pre-Earn December 3, 2019 - January 2, 2020
Customer Earn January 3, 2019
Year-End Closeout
December 3, 2019 - January 2, 2020
New Stampin' Up! Paper Trimmer
Order #152392
2019 Holiday Catalog
September 4, 2019 - January 2, 2020
Annual Catalog
June 4, 2019 - June 2, 2020
Modular Storage Solutions organize and customize 'Your Space. Your Way'.
Stampin' Up!'s new Cling Stamps are better than ever!
PLEASE GIVE CREDIT WHERE CREDIT IS DUE!
Using Stampin' Up!'s Layering Circles Dies, I used the 2-3/8" Circle Die to die cut out Circles from Coastal Cabana Cardstock for behind each wreath.
I adhered the Wreath to the Circle and to my Gift Card Holder with Stampin' Dimensionals.
For this Gift Card Holder: I used my 1/8" Handheld Hole Punch, punched out Circles from Red Glimmer Paper and adhered them to my Wreath as shown in the picture above.
Using the Snowman Builder Punch, I punched out the Snowman and then fussy cut out the Mittens and the Hat from Stampin' Up!'s Let It Snow Specialty Designer Series Paper.
I assembled my Snowman and adhered him to my Wreath with Stampin' Dimensionals.
I used the following Ribbons on my Gift Card Holder Inserts: 1/4" Bermuda Bay Striped Ribbon, 3/8" Silver Metallic Edge Ribbon, 3/8" Real Red Cotton Ribbon, 1/8" Real Red Curly Ribbon and 3/8" Shaded Spruce Gold Striped Ribbon. I wrapped the Ribbon around the Inserts and then tied them into a Bow.
I used the Itty Bitty Christmas Stamp Set to stamp all of the sayings in Black Memento Ink and punched them out with the Tree, Moose and Gleaming Ornaments Punches.
I trimmed out Cardstock Panels to use for samples where the actual Gift Card gets adhered to the Insert with Glue Dots.
I adhered the punched out sayings to the Ribbons on the Inserts with Glue Dots.
I adhered Snowflake Sequins to 3 of the Wreaths.
For this Gift Card: Using the Snowman Season Stamp Set, I stamped my Snowman onto Shimmery White Cardstock in Black Memento Ink.
Using one of the Dot Stamps from a Paper Pumpkin Kit, I stamped the Snowmans' Cheeks in Flirty Flamingo Ink.
Using the Snowman Builder Punch, I punched the Arms from Soft Suede Cardstock and the Hat from Basic Black Cardstock.
I fussy cut a Red Strip of Real Red Cardstock for the Hat.
I fussy cut out the Holly and Berries from the Let It Snow SDSP.
I assembled the Snowman and adhered him to the Wreath with Stampin' Dimensionals.
I fussy cut out this Snowman from the Let It Snow SDSP.
I adhered the Snowman to the Wreath with Stampin' Dimensionals.
I used scraps of the Let It Snow SDSP to stamp my Saying onto and then punched them out.
I think this Snowman is looking sideways to see if Santa is on his way!!! =)
I really loved working with the Blueberry Bushel and Flirty Flamingo colors for Christmas. It was a nice change from the traditional colors.
It's a toss up between the Snow Lady and this Snowman as to which is my FAVE.
O.K. I'm running out of things to say!!! =)
Such cuteness!!! And ...
Here's my Sloppy hand written Template for the Gift Card Holder.
Enjoy!!!
Have a Blessed Day!!!
If you have any questions about ordering or want instructions to make any of my Card and/or Projects, please e-mail my at dodge3670 at aol dot com. I will no longer be putting the exact instructions on my blog posts.
If you leave a comment in the comment section, I cannot respond back to you as I would need your e-mail address. I can leave a reply to your comment on the actual blog post; but, I cannot contact you without an e-mail address.
Thank you so much and I'm sorry for any inconvenience.
I'm so glad that all of you, my blog followers, understand about giving credit where credit is due. It has been a real honor and a pleasure to help out everyone that has e-mailed me for the instructions for my designs.
It is also fun to get to know everyone that is e-mailing to me. If I can help in any way, please let me know by e-mail dodge3670 at aol dot com. I will try to respond within the next 1-3 days of your e-mail.
Wishing you all a Sunny Day!!!
Blessings
Lynn
Have a Blessed Day!!!
If you have any questions about ordering or want instructions to make any of my Card and/or Projects, please e-mail my at dodge3670 at aol dot com. I will no longer be putting the exact instructions on my blog posts.
If you leave a comment in the comment section, I cannot respond back to you as I would need your e-mail address. I can leave a reply to your comment on the actual blog post; but, I cannot contact you without an e-mail address.
Thank you so much and I'm sorry for any inconvenience.
I'm so glad that all of you, my blog followers, understand about giving credit where credit is due. It has been a real honor and a pleasure to help out everyone that has e-mailed me for the instructions for my designs.
It is also fun to get to know everyone that is e-mailing to me. If I can help in any way, please let me know by e-mail dodge3670 at aol dot com. I will try to respond within the next 1-3 days of your e-mail.
Wishing you all a Sunny Day!!!
Blessings
Lynn
Clearance Rack
Here's a link to SU's Clearance Rack:
2019-20 Annual Catalog
If you are interested in purchasing Stampin' Up products, you can order from me on-line at www.stampinup.com and please choose me, Lynn Gauthier, as your Demonstrator.
2019 Holiday Catalog
If you are interested in purchasing Stampin' Up products, you can order from me on-line at www.stampinup.com and please choose me, Lynn Gauthier, as your Demonstrator.
If you would like to visit my Pinterest Boards, Please click on the link below: Here
January 2020 Paper Pumpkin: I’ll Bee Yours
If you would like to order Paper Pumpkin, please click on the link below and please choose me, Lynn Gauthier, as your Demonstrator.
January - June 2020 Mini Catalog (Occasions Catalog)
Demonstrator Pre-Orders December 3, 2019 - January 2, 2020
Customer Orders January 3, 2019
January - June 2020 Sale-A-Bration
Demonstrator Pre-Earn December 3, 2019 - January 2, 2020
Customer Earn January 3, 2019
Year-End Closeout
December 3, 2019 - January 2, 2020
New Stampin' Up! Paper Trimmer
Order #152392
2019 Holiday Catalog
September 4, 2019 - January 2, 2020
Annual Catalog
June 4, 2019 - June 2, 2020
Modular Storage Solutions organize and customize 'Your Space. Your Way'.
Stampin' Up!'s new Cling Stamps are better than ever!
If you are interested in purchasing Stampin' Up products, you can order from me on-line at www.stampinup.com and please choose me, Lynn Gauthier, as your Demonstrator.
Clearance Rack
Here's a link to SU's Clearance Rack:
2019-20 Annual Catalog
If you are interested in purchasing Stampin' Up products, you can order from me on-line at www.stampinup.com and please choose me, Lynn Gauthier, as your Demonstrator.
If you would like to visit my Pinterest Boards, Please click on the link below: Here
PLEASE GIVE CREDIT WHERE CREDIT IS DUE!
I recently discovered that people are using my cards and/or projects, duplicating them and entering them into challenges, using them for their own card classes and (using them on their blogs as their own creations) - Please give credit where credit is due. My cards and projects are my own creations and are not to be used in challenges, blog hops, card classes or sold at craft shows; etc., for profit. I don't mind if you duplicate my creativity to pass on to family members or friends as gifts or Occasions cards; but, PLEASE be considerate of others creativity! Thank you!
No comments:
Post a Comment